Weldy Miniwelder Tex1 | Superlight Automatic Welder for Ultra-Thin Films & Membranes | Dubai UAE

Welding Foils So Thin Most Machines Would Destroy Them

Greenhouse films. Agricultural ground covers. Lightweight pond liners and protective sheeting. These materials can be as thin as 0.05 mm — thinner than a sheet of paper — and pressing a conventional flat hot wedge into them usually means stretch marks, wrinkles and burn-through. The Weldy Miniwelder Tex1 solves this with a genuinely clever piece of engineering: an innovative ball wedge that concentrates heat through a rolling contact point, welding foils and membranes from 0.05 to 1.0 mm cleanly, at speeds up to 7.5 m/min.

For the UAE’s rapidly growing agricultural sector — greenhouse projects in Al Ain, hydroponic farms in Sharjah’s Al Dhaid belt, and shade/cover installations across Abu Dhabi’s food-security programmes — the Tex1 is the machine that turns kilometres of thin-film seaming from a hand-ironing nightmare into a one-operator walk. At just 3.5 kg and priced as the most affordable automatic welder in the Weldy range, it delivers professional seams without a professional-machine budget.

Key Features of the Weldy Miniwelder Tex1

Innovative Ball Wedge for Films from 0.05 mm

The Tex1’s hard-anodized aluminium ball wedge is its defining feature. Instead of dragging a flat wedge face across fragile film, the ball geometry rolls heat into the overlap with minimal friction — no snagging, no stretching, no distortion. It is what makes reliable welding on 0.05–0.3 mm foils possible at all, a range where even our thin-membrane specialist Miniwelder Tex2 (0.1 mm minimum) gives way to the Tex1.

Revolutionary Control System — Start-Up Is Child’s Play

Welding start-up on thin film is normally the moment things go wrong. The Tex1’s control system manages the start sequence so smoothly that Weldy describes it as child’s play — set temperature and speed, position the machine, and it takes the seam from there. Simple, intuitive controls mean seasonal agricultural labour can run it after minimal training.

Chainless Drive Technology

Like its siblings the Miniwelder Geo2 and Tex2, the Tex1 uses Weldy’s chainless drive: direct, even power to the rollers with no chain stretch or slip. Constant speed on constant-thickness film equals a constant, uniform seam — and less maintenance in dusty farm and site environments.

Only 3.5 kg with 300W Efficiency

The Tex1 draws just 300W — it runs happily on small generators and long extension runs common on remote UAE farm plots — and at 3.5 kg it is carried, positioned and repositioned all day without fatigue.

Good Performance at an Affordable Price

Weldy positions the Tex1 exactly here on purpose: the entry point into automatic welding. Farms and contractors who currently hand-weld film with a heat gun such as the Weldy HT1600 typically recover the Tex1’s cost within the first large greenhouse or cover project through labour savings alone.

Tex1 vs Tex2 vs Geo2 — Which Miniwelder for Your Material?

Tex1 (this page): ultra-thin foils 0.05 – 1.0 mm, 15 mm ball-wedge seam — greenhouse films, agriculture, light covers; the affordability champion at 300W.
Tex2: thin membranes 0.1 – 1.0 mm with an 800W system and a 20 mm wide seam for stronger joints on roofing and industrial fabrics — see the Miniwelder Tex2 thin-membrane welder.
Geo2: geomembranes 0.4/0.5 – 1.5 mm with a double seam + test channel for QC-tested pond, tank and foundation lining — see the Miniwelder Geo2 geomembrane machine.
WGW 300: heavy HDPE 0.8 – 2.5 mm for landfills, mines and reservoirs — the WGW 300 hot wedge welding machine.

Rule of thumb: below 0.1 mm, only the Tex1’s ball wedge will do; need a testable double seam, go Geo2; heavy HDPE earthworks, go WGW 300.

Applications Across Dubai, Sharjah, Abu Dhabi and the UAE

Greenhouse films – joining and repairing polytunnel and greenhouse covers on Al Ain and Al Dhaid farms
Agricultural ground covers & mulch films – weed-control fabric and ground sheeting seams
Ponds and light liners – decorative ponds, temporary containment, evaporation covers
Protective covers and tarpaulins – equipment covers, construction sheeting
Roofing and waterproofing membranes – thin PE/PVC/TPO details on site
Industrial fabrics – tent fabrics, curtains, flexible ducting and custom textile products

For structural thick-wall plastic work beyond film — tanks, pipes, fittings — the extrusion welders Booster EX2 and Booster EX3 complete the Weldy system.

Weldy Miniwelder Tex1 Technical Specifications

Specification	Value
Voltage	230 V~
Frequency	50/60 Hz
Maximum power	300 W
Temperature	60 – 480 °C
Hot wedge	Aluminium, hard anodized (ball wedge)
Hot wedge width	15 mm
Max. overlap	100 mm
Welding speed	0.4 – 7.5 m/min
Dimensions (L × W × H)	228 × 228 × 170 mm
Weight	3.5 kg
Weldable materials	PE, PVC, TPO, PP
Material thickness	0.05 – 1.0 mm
Conformity	CE

Delivery contents: Instruction manual, transport box, Allen key, cleaning brush.

Accessories from Dubai stock: Complete 15 mm aluminium heating wedge, silicone drive rollers 22 × 50 mm (pair, without test channel), and the Miniwelder guide bar for dead-straight long seams.

Buy the Weldy Miniwelder Tex1 in Dubai, Sharjah, Abu Dhabi & Across the UAE

Genuine Miniwelder Tex1 units (230V, EU plug) ship from our Deira stock across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain. Greenhouse builders, agricultural suppliers, tent and tarpaulin workshops and waterproofing crews get machines, spare wedges and rollers locally — with honest advice on whether the Tex1, Tex2 or Geo2 fits your material before you spend.

📞 Call now: +971 50 178 9490

Frequently Asked Questions – Weldy Miniwelder Tex1

What is the thinnest material the Tex1 can weld?

Foils from just 0.05 mm — the thinnest working range of any Weldy wedge machine, made possible by the ball-wedge design. The upper limit is 1.0 mm.

What materials does the Miniwelder Tex1 weld?

PE, PVC, TPO and PP films and membranes within the 0.05–1.0 mm range — covering greenhouse film, mulch film, light liners, covers and industrial fabrics.

What is a ball wedge and why does it matter for thin film?

Instead of a flat heated face, the Tex1 uses a rounded, hard-anodized aluminium wedge that rolls heat into the overlap through a small contact point. Fragile films pass over it without snagging, stretching or burning — the failure modes of flat wedges on sub-0.3 mm material.

How fast can the Tex1 weld greenhouse film?

Adjustable from 0.4 to 7.5 m/min. On clean, uniform film, one operator routinely seams several hundred metres per day.

Is the Tex1 suitable for roofing membranes?

For thin PE/PVC/TPO membranes up to 1.0 mm, yes. For membranes needing a wider 20 mm seam or starting from 0.1 mm, the Tex2 is the dedicated roofing choice; for geomembranes with a testable double seam, choose the Geo2.

Can it run on a generator at a remote farm?

Yes — at only 300W max, the Tex1 is the most generator-friendly machine in the range, ideal for off-grid agricultural plots in Al Ain, Al Dhaid and the Western Region.