Keeping your pool clean and ice-free is not always a simple task. However, with this robotic cleaner on duty as soon as it’s set up, you can help avoid obstacles that make keeping your pool clear much more difficult. The Dolphin ADVANTAGE PRO Pool Cleaner filter offers a variety of cleaning modes to suite your specific needs – all you need to do is press a few buttons and wait for the pearl-like gleam of your clean water!

Dolphin ADVANTAGE PRO Pool Cleaner Speicifcation:-

Connectivity & Automation
Connectivity Type	Bluetooth, Wi-Fi
Weekly Timer	Yes
Automation Mode	Yes
Delay Feature	No
Size & Dimension
Robot Weight	18.478 lb
Package Dimensions	22.244×17.598×12.795 inch
Cable Length	60 ft
Gross Weight	27.56 lb
Cleaning
Filter Type	Fine Filter Kit
Filter Access	Top Access
Cleaning Coverage	Floor, Walls and Waterline
Full Bag Indicator	No
Waterline Scrubbing	Yes
Enhanced Cleaning Cycles	No
Default Cycle Time	2
Active Brush	Yes
Number of Brushes	2
Brush Type (Material)	Standard Brush
Anti Tangling Swivel	Yes
Suction Rate	4000 gph
Pool Attributes
Maximum Pool Size	40 ft
Pool Classification	In Ground
Pool Shape	Rectangular, Oval, Free Shape, Hopper, Kidney, Zero (beach) entry

Introduction to the Dolphin ADVANTAGE PRO Robotic Pool Vacuum Cleaner, A robotic in-ground automatic pool cleaner

If you are looking for a robotic pool cleaner that will take care of your in-ground pool, then the Maytronics Dolphin ADVANTAGE PRO robotic pool cleaner is the perfect choice. This robotic cleaner features advanced technology that allows it to clean your pool quickly and efficiently. The Dolphin Premium also has a built-in filtration system that will trap dirt and debris, so your pool stays clean and clear.

This cleaner is easy to use and comes with everything you need to get started. Simply place the cleaner in your pool and let it do its job. You can trust that the Dolphin ADVANTAGE PRO will leave your pool sparkling clean.

Connecting the Dolphin ADVANTAGE PRO

Assuming you have a Dolphin ADVANTAGE PRO Robotic In-ground Robotic Pool Cleaner for Pools:

1. Take the power supply unit and plug it into an outlet. Be sure that the GFCI is turned on if you are using one. If your pool is equipped with a 115/230 VAC, 60 Hz Booster Pump, plug the provided power cord into the booster pump surge protector before connecting to a 115/230 VAC, 60 Hz wall outlet.
2. Connect the float cable to the float. Make sure that you connect the yellow end of the cable to the “Y” marked on the bottom of the cleaner and that you leave enough slack in the cable so that the cleaner can freely move around your pool. We recommend securing excess slack with plastic zip ties (not included). It is also important that you do not let the cable drape across any corners where it could snag and tear. Doing so could cause serious damage to your cleaner and void your warranty.
3. Next, connect one end of your hose to yourcleaner. For best results, use a new hose or one that is in good condition without any kinks or holes. If necessary, usehose weights (included) or tape (not included)to keepthe hose submerged.To avoid pinching, do not overtighten either connection point. Once everything is secure, slowly loweryourcleanerinto then water making sure there are no air pockets